Frequently Asked Questions
Q: Do I need a primer before applying Caliper Coat?
✅ No. This product is designed for direct-to-metal (DTM) application. It provides strong adhesion and corrosion resistance without primer or adhesion promoter.
Q: How many coats should I apply?
✅ Apply 3 coats – starting with light/medium coats and finishing with a medium/wet coat. Flash time between coats is approximately 5 minutes.
Before You Begin
🔴 Important Precautions:
-
Always wear a respirator, gloves, and appropriate protective gear.
-
Shake the can vigorously for at least 2 minutes before use.
-
Ideal application temperature: 68°F (20°C) with 35–75% humidity.
-
Apply in a well-ventilated area.
-
If conditions are very dry, lightly mist the air or use a humidifier for best results.
Application Steps
1. Surface Preparation
-
Clean all surfaces thoroughly with a solvent cleaner.
-
For plastic components, use a waterborne/plastic cleaner.
-
Ensure the surface is free of dirt, grease, or contaminants.
2. Spray Application Instructions
-
Hold can 8–10 inches from the surface.
-
Apply 3 coats:
-
First coat: light/medium, 5-minute flash.
-
Second coat: medium coat, 5-minute flash.
-
Third coat: medium/wet coat for full coverage.
-
-
For light colors such as yellow or white, apply 2–3 light mist coats first to ensure even color coverage before proceeding with medium coats.
-
No clear coat is required.
-
After spraying, turn the can upside down and press until only clear gas exits to clean the nozzle.
3. Drying and Curing
-
Out of dust: ~30 minutes.
-
Handle time: 1–2 hours.
-
Full cure: 14–21 days.
-
Washing with water or soap should be avoided for at least 14 days after spraying.
4. Cleanup
-
Use Acetone or Xylene to remove overspray from unwanted areas.
-
Dispose of rags safely by laying flat to dry before discarding.
Characteristics
-
Direct-to-metal (DTM), no primer required.
-
Excellent adhesion and chemical resistance.
-
Durable, UV-protected finish designed for high-heat and high-wear areas such as calipers, wheels, and suspension parts.
-
Heat resistance: 150°C (300°F).
-
Storage stability: 18 months.
-
Available finishes: matte (0–25 gloss), satin (35–50 gloss), gloss (80–100 gloss).
Need Further Assistance? No Worries!
📧 Contact us at help@poppyspatina.com for additional support.