Frequently Asked Questions
Q: What is this primer used for?
✅ Pro High-Build Filler Primer is designed to quickly fill scratches and surface imperfections, leaving a smooth surface that’s easy to sand.
Q: Do I need another primer over this before topcoat?
✅ No. Most topcoats can be applied directly over this filler primer once cured.
Before You Begin
🔴 Important Precautions:
-
Always wear a respirator, gloves, and proper protective equipment.
-
Apply in a well-ventilated area at 68°F (20°C) or above.
-
Shake can well before use.
Application Steps
1. Surface Preparation
-
Clean and dry the surface thoroughly.
-
Sand imperfections with coarse paper, then finish with 400–600 grit before applying topcoat.
-
Ensure the surface is free from grease, oil, or contaminants.
2. Spray Application Instructions
-
Hold can ~8–10 inches from the surface.
-
Apply several thin layers for best filling performance.
-
Allow 15–30 minutes drying time between coats.
-
Can be applied wet-on-wet or wet-on-dry depending on repair size.
-
Drying time depends on temperature, humidity, and film thickness.
3. Drying and Curing
-
Dust dry: ~15 minutes.
-
Touch dry: ~30 minutes.
-
Full cure: 24 hours.
-
Once cured, sand smooth before applying topcoat.
4. Cleanup
-
Use appropriate solvent cleaner to remove overspray.
-
Turn can upside down and spray until only clear gas exits to clean nozzle.
Characteristics
-
Acrylic binder with high filling power.
-
Excellent adhesion and fast drying.
-
Compatible with most topcoats and primers (synthetic or nitro-based).
-
Leaves a smooth, sandable finish.
-
Storage stability: 34 months.
-
Size: 400 ml.
Need Further Assistance? No Worries!
📧 Contact us at help@poppyspatina.com for additional support.